19-4699; 7/09
DS9503
ESD Protection Diode with Resistors
www.maxim-ic.com
SPECIAL FEATURES
SYMBOL AND CONVENTIONS
?
?
?
?
Zener characteristic with voltage snap–back
to protect against ESD hits
High avalanche voltage, low leakage and low
capacitance avoid signal attenuation
Compatible to all 5V logic families
Space saving, low inductance TSOC surface
mount package
C
IC
VCA
A
PACKAGE OUTLINE
TSOC SURFACE MOUNT PACKAGE
1
6
?
?
On–chip 5 ?? resistors for isolation at both
anode and cathode terminals
Industrial temperature range
2
3
5
4
SIDE VIEW
TOP VIEW
ORDERING INFORMATION
DS9503P+
DS9503P+T&R
6-lead TSOC package
6-lead TSOC package
+Denotes a lead(Pb)-free/RoHS-compliant package.
T&R = Tape and reel.
DESCRIPTION
This DS9503 is designed as an ESD protection device for 1–Wire MicroLAN interfaces. In contrast to the
DS9502, the DS9503 includes two 5 ?? isolation resistors on chip. Although 5 ?? are negligible during
communication, they represent a high impedance relative to the conducting diode during an ESD event.
Thus, the diode absorbs the energy while the resistors further isolate and protect the circuit at the other
side of the package. If used with circuits that already have a strong ESD–protection at their I/O port, the
ESD protection level is raised to more that 27 kV (IEC 801–2 Reference model). In case of abnormal
ESD hits beyond its maximum ratings the DS9503 will eventually fail “short” thus preventing further
damage.
During normal operation the DS9503 behaves like a regular Zener Diode. When the voltage exceeds the
trigger voltage, the I/V characteristic of the device will “snapback” allowing the same or higher amount
of current to flow, but at a significantly lower voltage. As long as a minimum current or voltage is
maintained, the device will stay in the “snapback mode”. If the voltage or the current falls below the
holding voltage or holding current, the device will abruptly change to its normal mode and conduct only a
small leakage current.
1 of 3
相关PDF资料
DSL70 E6327 DIODES TVS ARRAY R-R SOT-143
DT-2R48-B6 SWITCH PLUNGER DPDT 10A SCREW
DT-2R722-A7 SWITCH PLUNGER DPDT 10A SCREW
DT-2RV212-A7 SWITCH ROLLER DPDT 10A SCREW
DT-2RV216-A7 SWITCH ROLLER DPDT 10A SCREW
DT-2RV22-B6 SWITCH ROLLER DPDT 10A SCREW
DT-2RV3-A7 SWITCH STRGHT LVR DPDT 10A SCREW
DT-2RV3-B6 SWITCH STRGHT LVR DPDT 10A SCREW
相关代理商/技术参数
DS9503P+T&R 制造商:Maxim Integrated Products 功能描述:ESD PROT DIODE W/ RESS 6PIN TSOC - Tape and Reel 制造商:Maxim Integrated Products 功能描述:TVS DIODE 7.5VWM 6TSOC 制造商:Maxim Integrated Products 功能描述:TVS Diode Arrays ESD Protection Diode w/Resistors
DS9503P+T&R 功能描述:TVS二极管阵列 ESD Protection Diode w/Resistors RoHS:否 制造商:Littelfuse 极性: 通道:4 Channels 击穿电压: 钳位电压:11.5 V 工作电压:2.5 V 峰值浪涌电流:20 A 安装风格:SMD/SMT 端接类型:SMD/SMT 系列: 最小工作温度:- 40 C 最大工作温度:+ 85 C
DS9503P+TR 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:ESD Protection Diode with Resistors
DS9503X 功能描述:DIODE ESD PROTECTION W/RES CSP RoHS:否 类别:过电压,电流,温度装置 >> TVS - 二极管 系列:- 标准包装:1,800 系列:TransZorb® 电压 - 反向隔离(标准值):28V 电压 - 击穿:31.1V 功率(瓦特):400W 电极标记:双向 安装类型:表面贴装 封装/外壳:DO-214AC,SMA 供应商设备封装:DO-214AC(SMA) 包装:带卷 (TR) 其它名称:SMAJ28CA-E3/61-NDSMAJ28CA-E3/61GITR
DS-9508NI-S 制造商:Hikvision USA 功能描述:8-Chnl IP Embedded Nvr 4 Sata Bays 2Tb Ea 制造商:HIKVISION 功能描述:8-CHNL IP EMBEDDED NVR 4 SATA BAYS 2TB EA
DS-9516NI-S 制造商:Hikvision USA 功能描述:16-Chnl IP Embedder Nvr8 Sata Bays 2Tb Ea 制造商:HIKVISION 功能描述:16-CHNL IP EMBEDDER NVR 8 SATA BAYS 2TB EA
DS-9608NI-SH 制造商:Hikvision USA 功能描述:8-Chnl IP Embedded Nvr HDMI 8 Sata Bays 2Tb Ea 制造商:HIKVISION 功能描述:8-CHNL IP EMBEDDED NVR HDMI 8 SATA BAYS 2TB EA
DS9615 制造商:NSC 制造商全称:National Semiconductor 功能描述:Dual Differential Line Receiver